TAPE FIXINGS :-

Made of gunmetal, these holdfasts can be used for attaching DC clips etc. Onto a narrow projection or extension such as angle iron.

Used in conjunction with the air rod brackets to connect the air rod and tapes. The coupling is screwed onto the air rod and then connects to the tape with the bolts

These are manufactured from Gunmetal or Aluminium and are being used for providing projection from the building wall or face. Rod brackets are mainly used with rod to tape coupling where it is not possible to fit a saddle on the roof and the air rod has to be fitted on the side of the building

Tape clips are used to hold the tape to the structure and are being manufactured in Copper and Aluminium. These are fixed to the surface by using screws.

These are used to secure copper tape to the building. Made in Gunmetal, the clip has a hole in the base for fixing to building with an appropriate screw and plug

Host's Square Tape / Junction clamps are made from gunmetal or
aluminium and are used for crossing over tapes, or for T joints or for
making straight through joints in a network of tapes.

These clamps, made of gunmetal, provide easy access to copper tapes / conductors for inspection or testing.